Shower Upgrade 101 - Top Tips For New Unit Installation

Shower Upgrade 101 - Top Tips For New Unit Installation

Blog Article

Additional Information

Every person seems to have their personal rationale involving How to Install a Direct-to-Stud Shower Enclosure.

An effective shower setup requires cautious planning and a great deal of job. In many cases, you will certainly require to do three types of jobs: mounting walls, mounting the plumbing, and also finishing walls.

Prep work

Firstly, you must decide on the kind of shower that you want to mount. It is very important to ascertain whether the selected shower can dealing with certain systems and also can control a risk-free degree of water through the central heating boiler. A lot of shower devices nowadays are designed to be versatile to various water pressures (such as saved hot water as well as cold mains).
It is likewise vital to take into account the water pressure as well as the preparation of the piping and also drainage for the shower

Various Kinds Of Shower Units

Push-on Mixer: The hose as well as spray parts of the push-on mixer shower unit can be connected to the bathroom tap based on your requirement, and also the water temperature can be readjusted via the faucets. Push-on mixers are cheap and incredibly basic to install. However, although the pipe connection is basic, it is easily displaced. Additionally, it is bothersome to change the temperature.

Bath/Shower Mixer: The tube as well as spray of this type of shower are integrated with a bathroom mixer tap, and also the temperature can be readjusted through the bathroom taps. It is a really affordable option and also no additional plumbing is included. Nonetheless, the bath/shower mixers also experience inconvenient temperature control alternatives.

Manual Mixer: The hose pipe and also spray of a manual mixer shower system belong of the wall surface unit as well as the cold and hot water supplies are connected to a solitary shutoff The temperature and pressure of the water are managed via either one or a variety of knobs (in extra expensive showers). Although temperature control is a lot easier in hand-operated mixer types, they are much more costly than the formerly mentioned mixers. They also need added plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The hose pipe and also spray of this shower kind are a part of the wall surface device and also the hot and cold water materials are attached to a single valve right here as well. It is full with an integrated stabiliser to self-adjust the water temperature level and to prevent it from ending up being as well warm. Among the largest benefits of a thermostatic mixer shower type includes convenient temperature control. Nevertheless, it is the most costly of the various mixer choices.

Power Shower: A power shower is a solitary device having an effective electrical pump that is capable of changing both the water pressure as well as temperature. This kind of shower can be fitted if there is water system from a cold water tank as well as a warm water cyndrical tube. A power shower makes the modification of both pressure as well as temperature simple. On the other hand, it is unsuitable for water heated up directly by the shower or where the water is supplied by a combination boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a keys cold water supply and also it warms the water electrically. It is necessary to note that for this shower type to be installed, the mains pressure needs to be a minimum of 0.7 kg/sq cm (10lb/sq in). The unit enables the temperature as well as pressure to be changed through a knob. Designs with temperature stabilisers are better as they stay unaffected by other taps somewhere else being used within the home. A major drawback of electrical showers is that the control handle just enables the choice of high temperatures at less pressure, or lower temperatures at a greater stress. This is bothersome in the winter when the spray is usually weak and also the keys water is chillier. Nevertheless, this issue is tackled in some models which are available with a winter/summer setup.

Approach

Relying on the type of shower you desire to mount, the shower head need to either be fitted in order to prevent its contact with the water in the bath below or the base tray, or it must have a check shutoff.
Prior to beginning, it is a good idea to note the settings of the shower head as well as control, and to prepare the pipe-work included. Additionally, the water drainage system to eliminate the waste water will require to be intended. Both positions of the cable course as well as the shower switch will additionally need to be thought about if a rapid or electric shower unit is being mounted.
Utilize the instruction overview supplied with the shower system to fit the shower control.Before suitable the pipelines that will supply the water to the shower system, it is important to remove the water supply. In order to shield the pipes, they should be offered a water resistant covering as well as likewise fitted with isolating shutoffs. The pipes can after that be hidden into the wall surface and smudged over to neaten the general appearance.
Fit the base tray, shower head, as well as fittings.
Attach the main shower control to the pipelines that will be providing the water (This may call for a female screw string adapter).
Reconnect the supply of water and also test the pipelines for any type of leakages, as some may require tightening up.
If you are mounting an electrical shower, bear in mind to switch off the electrical energy supply prior to making any type of electric connections. When these links have actually been made (there ought to be advice within the instruction manual), the power supply can be switched over back on.

Adjusting Water Pressure to Match Your Shower

The cold water tank can be raised to a greater elevation (sometimes as low as 150mm (6inches)) by installation a strong wood assistance below it - perhaps composed of struts as well as blockboards. If you select this option, the primary and also distribution pipes will certainly likewise need to be raised to satisfy the brand-new height of the tank.
Conversely, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever type is selected, it has to be connected right into the power supply in order to run.

Piping and Drain

It is best to use 15mm diameter supply pipes, and make the go to the shower as brief and also straight as feasible so regarding keep optimal stress as well as reduce warmth loss. Additionally, by minimising the use of elbow joints for pipe edges, you can reduce the resistance in the flow of the water system. You can accomplish this by bending the pipes instead.

Many Common Mistakes

Going against or neglecting regional code restrictions.

Using pipelines that are as well little.

Connecting copper to galvanized without using a brass or dielectric suitable in between the two.

Not using tape or pipeline substance at threaded joints.

Not leveling your fixtures when installing them.

Not installing an air gap filling for components.

Reducing supply stub outs also brief to set up the shutoff valves onto after the completed wall is in area.

Not effectively straightening tubes into fittings or quit shutoffs. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will create a leakage.).

When turning the water back on in your house, constantly run the outside hose shutoff or purge your toilets to hemorrhage dirt and air from the lines. This particles can trigger problems in your sink taps as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like more info about Simple ways to Install a Shower Cubicle on Your Own? Make feedback directly below. We would be glad to know your views about this article. We are looking forward to see you back again in the future. If you please take the opportunity to share this page if you enjoyed reading it. I recognize the value of reading our article about How to Install a Direct-to-Stud Shower Enclosure.

Book A Service

Report this page